HART Field Devices
Become a Member of FieldComm Group Members sign an Intellectual Property Rights License agreement which allows for the development, manufacturing, an...
Wed, 23 Aug, 2023 at 1:49 PM
Self-diagnostics is one of the valuable features of smart devices, and command 48 is used by most hosts/systems for field devices and systems issue diagno...
Thu, 7 Jan, 2021 at 9:23 AM
FieldComm Group's lab facility does not have 3-phase mains.
Only single-phase, 60 Hz 110v AC and 220v AC, and 24v DC are available.
Tue, 1 Dec, 2015 at 5:12 PM
LIT-18 is not published or shared out side of FieldComm Group. This document is required for testing in our labs, it describes the device and the HART comm...
Wed, 3 Feb, 2021 at 11:36 AM
The FieldComm Group tests products using the latest version of the HART Test System to ensure a complete conformance verification. Products submitted for “...
Wed, 26 Aug, 2020 at 10:12 AM
The HART Test System does not currently run an automated test for DLL013. For DLL013: In order to satisfy compliance with these tests you simply ne...
Fri, 7 Aug, 2020 at 1:26 PM
HCF_FRM-110 was deprecated and replaced by the HART Product Exhibit included in the Registration Kits for HART and WirelessHART products. Upon opening...
Mon, 14 Dec, 2020 at 4:00 PM
By definition, Dynamic Variables are Device Variables, therefore any Dynamic Variables returned in Command 3 must also be returned in Command 9. From the C...
Mon, 16 Mar, 2020 at 3:11 PM
Command 104 Write Burst Trigger sets the Unit Codes and levels used for Windowed and Level (Rising or Falling) trigger modes used in "Smart Device Publ...
Tue, 17 Mar, 2020 at 5:01 PM
After DLL040 test start, a prompt would ask you to place 2 devices with different polling address in multi-drop mode. Be sure to cycle the power before you...
Fri, 22 Jul, 2022 at 7:09 AM