Version 3.8 - September 2023


This release reflects the following Test Specifications:

FCG TT20001 Revision 5.1 prelim A

FCG TT20003 Revision 5.2 prelim B

FCG TT20004 Revision 7.1 prelim A 

FCG TT20008 Revision 1.0 


Also refer to FCG PD10316 for HART-IP Registration and Test Procedures

Preliminary documents are available in Workspace

Released Test Specifications are available on our ShareFile for members.


New Test Cases for Version 3.8:


 HART-IP Server Tests:

HIP101

HIP103D

HIP205

HIP303002

HIP303009

HIP303024B

HIP303042

HIP305C

HIP102

HIP202A

HIP206

HIP303003

HIP303012

HIP303024C

HIP304A

HIP401

HIP103A

HIP202B

HIP301

HIP303004

HIP303014

HIP303032

HIP304B

HIP402

HIP103B

HIP203

HIP302A

HIP303005

HIP303015

HIP303033A

HIP305A


HIP103C

HIP204

HIP302B

HIP303007

HIP303024A

HIP303033B

HIP305B



 Data Link Layer Tests:

 DLL028A

 DLL028B


 Universal Command Tests:

UAL003A

UAL004

UAL015

UAL003B

UAL005

UAL038C

UAL003C

UAL013A

UAL048C

UAL003D

UAL013B

UAL003E

UAL014


 Common Practice Command Tests:

CAL520A
CAL543A
CAL520B
CAL543B
CAL532A

CAL532B

CAL538A


Known Issues

Known issues at the time of release are included below. If additional notable issues are found with this version of the product, they will be added to this log for reference with the date they were reported.


CR/Bug NumberComponentSummaryReported Date
(MM/DD/YY)
Workaround
1434hiptpIntermittent Restarting State Machine Message7/26/22
206
CAL104B
Update Period Incorrectly Calculated When Command 31 is Not Supported
10/18/2023
Yes
1621
CAL526CNeeds To Send Command 48 for the "The RESET case".
09/19/2023

1763
UALW004
Test expected to fail (FP257) when executed on the wireless channel (UAL004 must pass on the FSK channel on a wireless device)
02/01/2024

1865
UALW003D
Test may fail when executed on the wireless channel (UAL003D must pass on the FSK channel on a wireless device)
04/11/2024


The following CRs were resolved in this release:


Data Link Layer Tests

CR/Bug NumberSummary
159Removed unnecessary sleep timer. 
519
DLL010 and DLL011 end with unexpected termination
690
DLL035: FP 280 does not check for byte count != 3
1377
All DLL, UAL, CAL Tests: Update IdentifyDevice to Latest Test Specification
1470DLL039A: Update Message Reporting
1474DLL024C: Update Post Processing Call to CheckSlaveSTO 
1531DLL040: Add Header Information to Device Log
1532Update Test Logs: Adjust APP / DLL Headers To Match Each Other


Universal Command Tests

CR/Bug NumberSummary
502AppLayer: Log names for wireless test execution to be changed to ualwxxx and calwxxx
859
UAL008: Update to Latest Test Specification
1134UAL011B: Warning Message Needs Updating
1145

Update Sequence Number Upper Bounds

1265UAL048B: Update Failure Point Comment For 3556 & 3557
1365UAL038A: Remove FP 3473
1376UAL003D, UAL038A, CAL071A, CAL109B, CAL524F, CAL526F CyclePower: Current Architecture Does Not Support HART-IP or Wireless.
1381UAL038A-C: Needs to be updated to the latest test specification.
1385UAL048A-C: Needs to be updated to the latest test specification.
1391UAL010: Update Test Case to Latest Test Specification.
1459

UAL014: Update Private Lab Logic So Command 15 is Sent Only To HART 6.

1464

UAL003B: Wireless Devices Failed For Retries


1597UAL004: Use lowercase for test name
1618ALL UAL, CAL and HIP test cases:HART-Add Connect Option


Common Practice Tests

CR/Bug NumberSummary
153CAL036: Prompt User To Set LRV To 0 and Then Wait For Enter 
214CAL526F: Failure Point 11172 can incorrectly get issued.
302CAL035: Report Failure Point Values
303CAL035: Test is not sending updated urv0
578CAL103C: abort earlier in absence of BACKs
799BURSTOFF: prints incomplete msg if either hipiosys or hipnmgw is running
854CAL104B: Update UPDATE_PERIOD To Handle ACQUISITION_PERIOD of 0xFFFFFFFF
1079CAL074D: VerifyResponseAndByteCount Counts Need Updating
1085CAL074B: Command 77 is Sending Incorrect Data
1234CAL074D: FP 7105 Need Updating
1242CAL109A: Remove FP 209 and Call DisableBurstMode
1332CAL000: Command 514 HART 6 BC Needs To Accept BC 4
1351EnableBurstMode: Update for Wireless Adapters
1393CAL074A: Update Test Case to Latest Test Spec
1394CAL074B: Update Test Case to Latest Test Specification
1401CAL073: Update Warning Message
1435CAL523B: ReadCondensedStatusMap Uses Wrong Index
1601CAL104B: Update Failure Point Message
1604CAL520A: Send Command 521 With Extra Byte
1606CAL071A: Test case should only run via fsk
1610CAL104A: Add Response Code 8 to VerifyResponseAndByteCount
1611CAL051: Remove Wireless Failure Points


HART-IP Server Tests

CR/Bug NumberSummary
1467

 HIP103A: Sends Invalid Inactivity Close Time

1468

 HIP206: Sends Additional PDU's After NAK Received


HART-IP Token Passing Data-Link Stack

CR/Bug NumberSummary

874

 

Improved the burst arbitration for HIPTP 

 
1425Improved Error Message Processing


HTest Application

CR/Bug NumberSummary
875HIPTP stack and HTest stack causing bus collisions


HSniffer Application

CR/Bug NumberSummary



Previous Releases

View the change log history here